YamahaPart.com

Where America goes for Yamaha OEM Parts and Accessories

FREE SHIPPING ON ALL ORDERS OVER $75 (U.S. Ground ship orders only)

 

Yamaha Technology 1973: First Monocross suspension

Yamaha Technology 1973: First Monocross suspension

Improved off-road drivability

 

Summary
Using just one shock absorber, the front end of which was located at the joint between the head pipe of the frame and the tank rail, with the rear end positioned on the upper portion of the triangular shaped rear swing arm, this mechanism succeeded in changing the up/down motion of the rear wheel into a forward/rearward motion, so that better shock absorption effect could be obtained.

 

 

 

 

 

Click to view fullsize image
Click to view fullsize image
Click to view fullsize imageFirst Monocross suspension

Operation
The term “Monocross suspension” referred to the combined construction of frame, swing arm and shock absorber. The shock absorber used a base valve and rubber membrane to pressurize the damper oil separately from nitrogen gas. As a result, even under hard use causing the unit to incline, the oil in it did not become aerated, which contributed to a more stable damping effect. Since the introduction of the Monocross suspension, every year has seen new improvements, such as the lighter and easier-to-produce de Carbon type and adoption of a specially designed coil spring that gives a progressive damping effect. Indeed, the amount of new technology that has come out of the development of this system is truly amazing.

Results
Earlier than the introduction of the Monocross suspension conventional rear suspension systems had generally relied on two separate shock absorbers on the right and left working on the swing arm. This meant that when the rear end received a severe shock from the road, the two shock absorbers would function independently, thus twisting the swing arm and causing a shake in the rear of the bike body. However, the newly developed Monocross suspension was able to solve these problems by adopting a single shock absorber attached to a rigid triangular swing arm that was highly resistant to twisting forces.
In addition, the fitting positions of the wheel axle and the shock absorber to the rear arm were altered so that the ratio between wheel travel and cushion stroke increased from 1.2-1.5 on conventional systems to 5 on the Monocross system, which meant much greater wheel travel, resulting in increased comfort, improved drivability and better grip on the road.

To Contact someone from sales call 1-(908) 237-0099

email to: info@yamahapart.com
Please contact our Webmaster with questions or comments.

Copyright yamahapart.com. All rights reserved. No part of this website can be reproduced without written consent of the owner.
Ecardeals America Inc.
300 Route 202
Flemington, NJ 08822
908-237-0099

Need Yamaha Parts? CALL TOLL FREE 1-(877) 467-7696

Yamaha Waverunner, Motorcycle, ATV, Side by Side, Utility, Sport Boat and Snowmobile OEM Parts
yamahapart.com OEM Yamaha parts and Accessories up to 40% off MSRP. Quick Shipping and a large inventory, this is where America goes for all its Yamaha OEM Parts. Brought to you for over 12 years by Yamaha leading online authorized OEM Parts supplier.

Where America goes for Yamaha Cruiser, Sport and Offroad motorcycles, Sport and Utility ATVs, Snowmobiles, and Watercraft, We have them all from From YZF-R1 Motorcycles, YZF-R6 Motorcycles to Yamaha Apex and Nytros. Check out our on-line parts. On-line fiche finders simplify finding the correct OEM Parts with on-line ordering which can be done directly from the Illustrated parts diagrams. We’ve Got them all , We can help you get a new Yamaha Exhaust, Yamaha seat, perform Yamaha performance increases, Yamaha racing parts, or even an new Yamaha carb or yamaha clutch.