YamahaPart.com

Where America goes for Yamaha OEM Parts and Accessories

FREE SHIPPING ON ALL ORDERS OVER $75 (U.S. Ground ship orders only)

1955 YA-1

1st Yamaha Motorcycle model ever produced. Sold in Japan in its first year of production. The 125cc, single cylinder, 2-stroke, streetbike had unique features including a cantilever seat, a plunger rear suspension system and a glove compartment in the fuel tank area.

1957 YD-1

The YD-1 was a 250cc, twin-cylinder, 2-stroke, streetbike. The first known Yamaha motorcycle in the US was purchased in Japan by Sgt. First Class Charles Butler of the US Army and brought to this country after his tour of duty in October 1957.

1958 YD-2

Yamaha began offering an electric start motorcycle with the YD-2. It was a 250cc, twin cylinder, single carb, 2-stroke, streetbike with a pressed-steel, monocoque frame.

1959 YDS-1

The 250cc, 2-stroke, twin cylinder, twin carb, streetbike had a reputation for blowing away 650cc vertical twins during this time.

1960 YA-3

The YA-3 was a 125cc, single cylinder, 2-stroke, streetbike, with a pressed-steel, monocoque frame. Along with the YD-2, these were the first Yamaha motorcycle models sold in the US by Yamaha International Corporation.

1964 Santa Barbara

This motorcycle introduced the innovative Yamaha "Autolube" oil injection system, which eliminated premixing two-cycle oil and gasoline. The YA-6 was a 125cc, single cylinder, 2-stroke, streetbike. Yamaha was the first motorcycle manufacturer to use oil injection. Later in '64, Yamaha was recognized for this innovation when Auto & Motor Sport Magazine gave Yamaha their "Safety & Engineering Award."

1965 Big Bear Scrambler

Designed in the US to meet the demands of US consumers, the YDS-3C had high pipes, skid plate, close-ratio gearing and braced handlebars. The Big Bear was known for its style, acceleration and a ripping exhaust note.

1968 DT-1

The DT-1 made a huge impact on motorcycling in the US because it was truly dirt worthy. The 250cc, single cylinder, 2-stroke, Enduro put Yamaha On/Off-Road motorcycles on the map in the US.

1970 XS-1

The first Yamaha 4-stroke model featured a 650cc vertical, twin cylinder engine. It became extremely popular due to its reliability and high level of rider enjoyment.

1971 Mini Enduro

This 60cc 2-stroke, off-road model was the first small-sized two wheeler that looked like larger motorcycles. Dad could ride his DT-1 and Junior could look just like him on his Mini Enduro.

1972 DT2-MX

1972 marked the year when Yamaha first produced engines with reed valves, called Torque Induction. This system helped deliver more low-end power and quicker engine response over the entire RPM range. All 1972 MX and Enduro models had reed valves, except the JT-2 Mini Enduro, which had rotary valve induction. This was also the first year for CD ignition, which came standard on the RT2-MX (360cc).

1972 TR3

This model enabled Yamaha to capture its first win at the Daytona 200. The winning TR3 was piloted by Don Emde. This started a streak of 13 consecutive wins at Daytona by Yamaha (1972 ~ 1984). This is a feat that will, more than likely, never be equaled.

1973 RD350

Known as the streetbike "Giant Killer" during this time. 350cc, 2-stroke, twin cylinder streetbike.

1973 TX-500

Yamaha broke into new territory by creating a 4-valve per cylinder engine in a production streetbike with the 500cc, 4-stroke, twin cylinder TX500.

1974 TY250

The pioneer of Yamaha Trials bikes. 250cc, 2-stroke, single cylinder.

1974 TZ700

In '74, Yamaha came out with its first-born 2-stroke, four-cylinder production road racer. The TZ700 was a 90 hp, 694cc engine that had the same 64mm bore size as the TZ350 and RD350. It had twin shock rear suspension. In 1975, cylinder bore was increased to 66.4mm yielding 747cc, producing about 15 more hp. The rear suspension was also upgraded to Monoshock.

1975 YZ250

Talking about innovation... Yamaha created the very first single-shock, production motocross bike ever. This was the beginning of the Yamaha Monocross machines that changed motocross forever. The YZs of this time were near replicas of "Works Bikes" with their aluminum fuel tanks and light weight, lacking only magnesium engine cases and a few titanium pieces.

1976 TT500

The original Yamaha 4-stroke Off-Road bike. The TT500 had a 500cc, single cylinder engine.

1978 650 Special

The beginning year for "Yamaha Specials." The 650 Special was the pioneer of production Cruisers built by Japanese manufacturers.

1978 XS Eleven

This machine was unique because it was the first Yamaha four-cylinder street bike. Shaft drive was standard. The horsepower king of 1978.

1980 1100 Midnight Special

The first "Midnight Special" model. Black bodywork and components that included an exclusive black chrome process, gold plating and black wrinkle finish.

1980 Maxim 650

Introduced in 1980, the Maxim 650 was a 4-cylinder, shaft drive that became extremely popular. It was a high performance cruiser that continued the street bike excitement created by the Yamaha Specials.

1981 YZ125

Race-developed over a three year period, the YZ125H was the first liquid-cooled Yamaha motocrosser. The alloyed aluminum radiator was mounted to the top triple clamp. Coolant was channeled through the handlebar crown, steering head pipe and the down pipe of the frame. Liquid-cooling helped minimize heat-induced power loss racers experienced during a race.

1981 Virago 750

The first Yamaha V-Twin model. Tear-drop tank, pull-back handlebars, 72° V-twin engine and shaft drive.

1981 PW50

The beginning of a long history of young rider excitement. A history of more than 20 years and the story continues.

1982 Seca 650 Turbo

Introducing the turbo charged Yamaha production motorcycle. A full fairing was standard equipment to reduce wind resistance and add visual appeal.

1983 Venture Royale

When Yamaha created the Venture Touring Bike, it went all the way. It was also the first liquid-cooled, 4-stroke, V-4 Yamaha and featured adjustable air suspension, luggage and stereo radio as standard equipment.

1984 FJ1100

A Superbike class milestone model. Weighing 500 lbs, with a whopping 125 hp, the FJ provided a power-to-weight that was unequalled for bikes of this size during this time.

1984 RZ350

A true milestone sport bike, the lightweight 350cc 2-stroke was offered in white/red and as a Kenny Roberts signature model, as shown here.

1985 FZ750

Yamaha introduces more performance innovation with a five valve per cylinder engine in a production motorcycle. Lay down cylinders helped provide desired weight distribution

1985 V-Max

The V-Max Motorcycle model hits the streets. "Awesome" is the word for this liquid-cooled V-4, V-boost, 145 hp power cruiser, fondly called "Mr. Max."

1987 FZR1000

This was the first year for an aluminum frame on a production Yamaha model in the US. The FZR also utilized the innovative Yamaha 5-valve per cylinder engine.

1989 FZR600

In its first year, the FZR600 dominated the 600 Supersport class at Daytona to establish itself as the Class Leader during this time.

1992 FJ1200 ABS

Yamaha introduces this street model with ABS.

1993 GTS

The first fuel injected Yamaha motorcycle model. Omega frame, RADD suspension featuring front & rear swingarms, ABS. This was also the first Yamaha 4-stroke model that had a catalytic converter.

1996 Royal Star

Yamaha introduces the exciting Royal Star cruiser. The authentic heavyweight featured American styling, steel fenders & bodywork, long 66.7" wheelbase and V-4 engine, all designed and manufactured with the highest standards of quality.

1998 V Star Classic

Yamaha begins offering a Star middleweight model. American styling, steel fenders & bodywork, long 64" wheelbase and 70° V-twin engine.

1998 YZ400F

The original production 4-stroke motocross bike by a Japanese manufacturer. Piloted by Doug Henry, it won the AMA National Outdoor Series in its first year.

1998 YZF-R1

The R1. Power, handling and styling established it as the Open Class leader for several years.

1999 YZF-R6

The newborn little brother to the R1, Yamaha introduces the R6. Power, handling and styling established it as the 600 Class leader.

1999 Road Star

Introducing the Road Star. 1602cc (98 cubic inch), air-cooled, pushrod, 48° V-Twin. Low 28" seat height and 66.3" wheelbase. This model was the first Yamaha motorcycle with belt drive.

2000 TT-R125L

Increasing the fun factor, Yamaha offers this 125cc, 4-stroke, single cylinder Off-Road bike. This bike helped to round out the Off-Road line and make Yamaha a serious contender in the category during this time.

2001 YZ250F

Continuing the Yamaha reputation for innovation, the world gets its first 250cc 4-stroke production MX Bike ever. The YZ250F won the 125 West SX title in its first year and the 125 East title in its second year.

2006 YZF-R6

The YZF-R6 becomes the first production motorcycle to use a “fly-by-wire” throttle control system rather than traditional cables: Yamaha Chip Controlled Throttle (YCC-T).

2006 Roadliner/ Stratoliner

Roadliner/ Stratoliner motorcycles introduced, featuring a 113-cubic inch (1854cc) fuel-injected V-twin engine for massive power and an advanced aluminum frame for superb cruiser handling.

2007 YZF-R1

Yamaha Chip Controlled Intake (YCC-I), the first ever electronic variable intake system on a production motorcycle, is introduced on the YZF-R1 to achieve the broadest possible powerband.

To Contact someone from sales call 1-(908) 237-0099

email to: info@yamahapart.com
Please contact our Webmaster with questions or comments.

Copyright yamahapart.com. All rights reserved. No part of this website can be reproduced without written consent of the owner.
Ecardeals America Inc.
300 Route 202
Flemington, NJ 08822
908-237-0099

Need Yamaha Parts? CALL TOLL FREE 1-(877) 467-7696

Yamaha Waverunner, Motorcycle, ATV, Side by Side, Utility, Sport Boat and Snowmobile OEM Parts
yamahapart.com OEM Yamaha parts and Accessories up to 40% off MSRP. Quick Shipping and a large inventory, this is where America goes for all its Yamaha OEM Parts. Brought to you for over 12 years by Yamaha leading online authorized OEM Parts supplier.

Where America goes for Yamaha Cruiser, Sport and Offroad motorcycles, Sport and Utility ATVs, Snowmobiles, and Watercraft, We have them all from From YZF-R1 Motorcycles, YZF-R6 Motorcycles to Yamaha Apex and Nytros. Check out our on-line parts. On-line fiche finders simplify finding the correct OEM Parts with on-line ordering which can be done directly from the Illustrated parts diagrams. We’ve Got them all , We can help you get a new Yamaha Exhaust, Yamaha seat, perform Yamaha performance increases, Yamaha racing parts, or even an new Yamaha carb or yamaha clutch.