2014 Yamaha FX NYTRO

2014 Yamaha FX NYTRO
Black
MSRP: $9,999.00
Manufacturer: Yamaha
Condition: New

Description

  • High Performance 4-stroke engine
    The over-achieving Genesis® engine is the heart of our lightweight and aggressive FX Nytro model family. The torquey, quick-revving engine has been independently dyno tested in the mid-130 horsepower range. It has dominated its competitors in nearly every performance comparison in the industry.
  • Advanced fuel injection
    The Genesis High Performance engine uses Yamaha’s advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engine’s spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
  • Engine Braking Reduction System
    The Genesis High Performance engine features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a “coast” feeling.
  • Lightweight rear-exiting exhaust
    The patented rear exit design serves many performance-enhancing functions on the FX Nytro. First, it maximizes horsepower by using a straight exhaust pipe design. Second, it reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight to contribute to the excellent balance of the sled.
  • Forced air radiator ducting
    The FX Nytro’s airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance even in low-snow conditions.
  • New! 15 x 121 x 1.25-inch Camoplast® Rip Saw™ II track
    The Camoplast® Ripsaw II™ has been designed to offer increased controlled lateral slide, allowing the Nytro to set up for the corner better while scrubbing off energy to keep both skis on the ground. The result is improved handling without the loss of straight line traction.
  • Single-piece extrovert drive sprockets
    Churning the track is a pair of factory-engineered single piece extrovert drive sprockets. The engineering team purpose-built these sprockets to reduce noise and vibration.

Specifications

Engine

Type
4-stroke / 3-cyl / 1049cc
Engine Class
High Performance Genesis
Clutch
YVXC
Fuel Delivery
3 x 41mm fuel injection
Fuel Capacity
7.3 gal (27.7L)
 

Chassis

Front Suspension
FXG2
Front Shocks
40mm aluminum HPG
Front Travel
8.5 in (216mm)
Rear Suspension
Dual Shock®
Rear Shocks
C40 R12.5 aluminum HPG/ C40 R12.5 aluminum HPG
Rear Travel
14.5 in (368mm)
 

Dimensions

Track / W X L X H
15 x 120 x 1.25 in
Track Type
Camoplast® Rip Saw® II
Ski Stance (ctr to ctr)
41.3 in (1050mm)
 

Features

Electric Start
Standard
Reverse
Standard
DC Output
Optional
Heated seat
N/A
Color (s)
Black
Warranty
1 Year (Limited Factory Warranty)
 

Features

Performance

  • High Performance 4-stroke engine
    The over-achieving Genesis® engine is the heart of our lightweight and aggressive FX Nytro model family. The torquey, quick-revving engine has been independently dyno tested in the mid-130 horsepower range. It has dominated its competitors in nearly every performance comparison in the industry.
  • Advanced fuel injection
    The Genesis High Performance engine uses Yamaha’s advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engine’s spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
  • Engine Braking Reduction System
    The Genesis High Performance engine features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a “coast” feeling.
  • Lightweight rear-exiting exhaust
    The patented rear exit design serves many performance-enhancing functions on the FX Nytro. First, it maximizes horsepower by using a straight exhaust pipe design. Second, it reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight to contribute to the excellent balance of the sled.
  • Forced air radiator ducting
    The FX Nytro’s airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance even in low-snow conditions.
  • New! 15 x 121 x 1.25-inch Camoplast® Rip Saw™ II track
    The Camoplast® Ripsaw II™ has been designed to offer increased controlled lateral slide, allowing the Nytro to set up for the corner better while scrubbing off energy to keep both skis on the ground. The result is improved handling without the loss of straight line traction.
  • Single-piece extrovert drive sprockets
    Churning the track is a pair of factory-engineered single piece extrovert drive sprockets. The engineering team purpose-built these sprockets to reduce noise and vibration.

Handling

  • Tuner Dual-Keel ski
    Returning to the Nytro is the Tuner dual-keel ski which greatly contributes to keeping the ski tracking straight and true down the trail, eliminating nosiness and darting. Each keel has its own wearbar, and Yamaha has four different bar configurations to choose from, which means you can tune your sled's cornering bite and steering effort to suit your personal preference.
  • FXG2 front suspension geometry
    The FX Nytro features the acclaimed FXG2 front suspension with more trail and relaxed caster for crisp steering response and confidence-inspiring, flat handling in the corners and through the rough trail.
  • FX™ chassis with sport rider-forward position
    The compact design puts the engine down low and back in the chassis, leaving the top of the cab open for airflow. This gives the FX Nytro a very centralized mass. The FX Nytro’s sport rider-forward ergonomic design puts the rider in an aggressive, yet comfortable, forward posture.
  • Over-the-engine steering
    The over-the-engine steering configuration gives the rider excellent posture on the sled. It also allows the engine to be tucked deep into the chassis for optimum balance and mass centralization.
  • Tall, hooked bars
    To match the tall and forward position, a single-piece, dual-hooked handlebar is standard fare on the FX Nytro. The hooks have the same grip material as the main bar section, for consistent control, regardless of hand position on the grip.
  • Composite upper skeleton
    The headlight assembly and upper portion of the FX Nytro is supported by a super-lightweight composite framework. By using a rugged, high tech composite material as the structure for the top portion of the sled, Yamaha engineers were able to keep the mass centered low and deep in the chassis.
  • Lightweight tunnel
    The FX Nytro features a lightweight tunnel design. With the running boards tipped up at an aggressive 11-degree angle, the FX Nytro delivers big ground clearance for rough trail capability. The new design also features large snow evacuation and boot gripper punch outs.

Comfort

  • HPG front shocks
    Lightweight aluminum HPG shocks on the front of the FX Nytro are calibrated to give you a very comfortable, yet sporty ride. This design proves to be lighter than the previous piggyback-style shock but does not compromise ride superiority.
  • Dual controls for Concentrated hand warmers
    The FX Nytro has dual controls to let you adjust the warmer levels for your hands on the left side and the thumb on your right. These hand warmers have a concentrated element design, which focuses the heat in the middle of the grip material. The result is a warm grip for your hand’s most comfortable riding position. In addition, an insulator is placed between the heating element and handlebar to retain heat longer and more efficiently than previous designs.
  • Dual Shock® rear suspension
    The race-proven Dual Shock rear suspension is the culmination of years of development, testing, racing and redevelopment to produce the ultimate big bump rear suspension. The FX Nytro’s rear suspension is engineered to handle the deep pits and big moguls you’ll find in the ditches and trails. The rear suspension uses a pair of 40mm aluminum HPG shocks.
  • Wheels with removable bearings
    Replaceable bearing wheels make maintenance easy and cheap, while the 6 spoke design adds to the visual appeal of the already super cool looking Nytro. This design is implemented on all rear wheels.
  • Sculpted narrow seat
    The FX Nytro has a narrow seat for added comfort. In addition to putting the rider in a tall, forward, attack posture, the seat’s height makes it plush and comfortable for a full day of riding. The narrow seat sits atop the beveled tunnel, which allows the track to be a traditional 15 inches wide, to maximize traction.
  • Standard electric start
    Yamaha’s electric starter system allows consumers to fire up their Nytro with the turn of a key. There is no pulling on a nylon cord to get this high-tech engine growling! Electric start is a standard feature on all of Yamaha’s 4-stroke machines.
  • Digital gauge
    The digital gauge displays key information at a glance. Vehicle speed is displayed on a large LCD readout either in miles or kilometers per hour. In addition, the rider can select tachometer, odometer or tripmeter data to appear on the secondary readout. The gauge also displays system warning lights, fuel level, and warmer intensity.
  • Standard mechanical reverse
    The Nytro’s simple reverse system allows riders to back out of tight spaces hassle-free. It’s engaged with the lever located on the right shroud.
  • Quick-release, single-piece hood/console shroud
    The FX Nytro has a single-piece hood and console shroud. The design allows owners to open and close the top portion of the sled easily with Dzus® quick-connect fasteners.
  • New graphic packages
    The FX Nytro comes in a new graphic package: all black.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information